The Accuracy International Arctic Warfare series of sniper rifles is standard issue in the armies of many countries, including those of Britain and Germany (picture shows a rifle of the German Army).
In military and law enforcement terminology, a sniper rifle is a rifle used to ensure more accurate placement of bullets at longer ranges than other small arms. A typical sniper rifle is built for optimal levels of accuracy, fitted with a telescopic sight and chambered for a military centerfire cartridge. The term is often used in the media to describe any type of accurized firearm fitted with a telescopic sight that is employed against human targets, although "sniping rifle" or "sniper's rifle" is the technically correct fashion to refer to such a rifle.
The military role of sniper (a term derived from the snipe, a bird which was difficult to hunt and shoot) dates back to the turn of the 18th century, but the sniper rifle itself is a much more recent development. Advances in technology, specifically that of telescopic sights and more accurate manufacturing, allowed armies to equip specially-trained soldiers with rifles that would enable them to deliver precise shots over greater distances than regular infantry weapons. The rifle itself could be a standard rifle (at first, a bolt-action rifle); however, when fitted with a telescopic sight, it would become a sniper rifle.
Classification[]
Modern sniper rifles can be generally divided into two basic classes: military and law enforcement.
Military[]
U.S. Marine Corps sniper team with an M86 sniper rifle, during sniper training.Sniper rifles aimed at military service often deliberately sacrifice a small degree of accuracy to obtain a very high degree of durability, range, reliability, sturdiness, serviceability and repairability under adverse environmental and combat conditions. Military snipers and sharpshooters may also be required to carry their rifles, along with other equipment, for long distances, making weight considerations very important. Military organizations often operate under strict budget constraints, which influences the type and quality of sniper rifles they acquire.
Law enforcement[]
Sniper rifles built or modified for use in law enforcement scenarios are generally required to have greater accuracy than military rifles, but are not required to have as extensive a range as their military counterparts.
As law enforcement-specific rifles are generally used in non-combat (often urban) environments they are also not required to be built with the same degree of hardiness or portability. However, shorter-range requirements often result in a smaller over-all size.
Some of the first examples of sniper rifles designed specifically to meet police and other law enforcement requirements were developed for West German police subsequent to the Munich massacre at the 1972 Summer Olympics. Many police services and law enforcement organizations (such as the U.S. Secret Service) now use rifles specifically designed for law enforcement purposes.
The Heckler & Koch PSG1 is one rifle specifically designed to meet these criteria and is often referred to as an ideal example of this type of sniper rifle. The FN Special Police Rifle was built for and is marketed to law enforcement rather than military agencies.
History[]
In the American Civil War, Confederate troops equipped with barrel-length three power scopes mounted on the then-premium
During World War II, the (7.62x54mmR) Mosin-Nagant rifle mounted with a telescopic sight was commonly used as a sniper rifle by Russian snipers.
British Whitworth rifle had been known to kill Union officers at ranges bordering 800 yards, an unheard-of distance at that time.
The earliest sniper rifles were little more than conventional military or target rifles with long-range "peep sights" and Galilean 'open telescope' front and rearsights, designed for use on the target range. Only from the beginning of World War I did specially adapted sniper rifles come to the fore. Germany deployed military calibre hunting rifles with telescopic sights which was countered by the British with Aldis, Winchester and Periscopic Prism Co. sights fitted by gunsmiths, to regulation SMLE Mk III and Mk III* rifles. Australia's No.1 Mk III* (HT) rifle was another later conversion of the SMLE fitted with the Lithgow heavy target barrel at the end of WW2.
Typical World War II-era sniper rifles were generally standard issue battle rifles, hand-picked for accuracy, with a 2.5x or 3x telescopic sight and cheek-rest fitted, with the bolt turned down if necessary to allow operation with the scope affixed. By the end of the war, forces on all sides had specially trained soldiers equipped with sniper rifles, and they have played an increasingly important role in military operations ever since.
Distinguishing characteristics[]
Sniper rifle features can vary widely depending on the specific tasks it is intended to perform. Features that may distinguish a sniper rifle from other weapons are the presence of a telescopic sight, unusually long overall weapon length,[5] a stock designed for firing from a prone position, and the presence of a bipod and other accessories.
Telescopic sight[]
The single most important characteristic that sets a sniper rifle apart from other military or police small arms is the mounting of a telescopic sight, which is relatively easy to distinguish from smaller optical aiming devices found on some modern assault rifles and submachine guns. This also allows the user to see farther.
A telescopic sight allows a person to see targets more precisely by virtue of the magnified image it offers, and therefore aim the rifle more accurately. The telescopic sights used on sniper rifles differ from other optical aiming devices in that they offer much greater magnification (more than 4x and up to 40x) and much larger objective lens (40 to 50 mm in diameter), resulting in a brighter image. Most telescopic lenses employed in military or police roles have special reticles to aid with judgment of distance, which is an important factor in accurate shot placement due to the bullet's trajectory.
Action[]
A Marine manually extracts and chambers a new 7.62x51mm round in his bolt-action M40A3 sniper rifle. The bolt handle is held in the shooter's hand and is not visible in this photo.The choice between bolt-action and semi-automatic (more commonly recoil or gas operation) is usually determined by specific requirements of the sniper's role as envisioned in a particular organization, with each design having advantages and disadvantages. For a given cartridge, a bolt-action rifle is cheaper to build and maintain, more reliable and accurate, and lighter; this is due to fewer moving parts in the mechanism. In addition, the lack of an external magazine allows for more versatile fire-positioning and manual case ejection allows for greater discretion. Semi-automatic weapons can serve a cross-purpose use as both a battle rifle and a sniper rifle, and allow for a greater rate (and hence volume) of fire. As such rifles may be modified service rifles, an additional benefit can be commonality of operation with the issued infantry rifle. A bolt-action is the most commonly used in both military and police roles due to its higher accuracy and ease of maintenance. Anti-material applications such as mine clearing and special forces operations tend to see a higher usage of semi-automatics.
A designated marksman rifle (DMR) is less specialized than a typical military sniper rifle, often only intended to extend the range of a group of soldiers. Therefore, when a semi-automatic action is used it is due to its ability to cross over into roles similar to the roles of standard issue weapons. There may also be additional logistical advantages if the DMR uses the same ammunition as the more common standard issue weapons. These rifles enable a higher volume of fire, but sacrifice some long range accuracy. They are frequently built from existing selective fire battle rifles or assault rifles, often simply by adding a telescopic sight and adjustable stock.
A police semi-automatic sniper rifle may be used in situations that require a single sniper to engage multiple targets in quick succession, and military semi-automatics like the M110 SASS are used in similar "target-rich" environments.
Cartridge[]
In a military setting, logistical concerns are the primary determinant of the cartridge used, so sniper rifles are usually limited to rifle cartridges commonly used by the military force employing the rifle. Since large national militaries generally change slowly, military rifle ammunition is frequently battle-tested and well-studied by ammunition and firearms experts. Consequently, police forces tend to follow military practices in choosing a sniper rifle cartridge instead of trying to break new ground with less-perfected (but possibly better) ammunition.
Before the introduction of the 7.62x51mm cartridge in the 1950s, standard military cartridges utilised were the .30-06 Springfield or 7.62x63mm (United States), .303 British or 7.7x56mmR (United Kingdom) and 7.92x57mm or 8mm Mauser (Germany). The .30-06 Springfield continued in service with U.S. Marine Corps snipers during the Vietnam War in the 1970s, well after general adoption of the 7.62x51mm. At the present time, in both the Western world and within NATO, 7.62x51mm is currently the primary cartridge of choice for military and police sniper rifles.
Worldwide, the trend is similar. The preferred sniper cartridge in Ru
ssia is another .30 calibre military cartridge, the 7.62x54mm R, which has similar performance to the 7.62x51mm. This cartridge was introduced in 1891, and both Russian sniper rifles of the modern era, the Mosin-Nagant and the Dragunov sniper rifle, are chambered for it.
Certain commercial cartridges designed without the logistical constraints of most armies with only performance in mind have also gained popularity in the 1990s. These include the 7 mm Remington Magnum (7.2x64mm), .300 Winchester Magnum (7.8/7.62x67mm), and the .338 Lapua Magnum (8.6x70mm). These cartridges offer better ballistic performance and greater effective range than the 7.62x51mm. Though they are not as powerful as .50 calibre cartridges, they also do not suffer any weight penalty as is the case for rifles chambered for .50 calibre ammunition, and offer a significant improvement over rifles chambered for 7.62x51mm. M82A1 SASR (Special Applications Scoped Rifle), a .50 calibre sniper rifle used as an anti-materiel rifle.Snipers may also employ anti-materiel rifles in sniping roles against targets such as vehicles, equipment and structures, or for the long-range destruction of explosive devices. Although designed and employed primarily as anti-materiel rifles, they may also be used against personnel.
Anti-materiel rifles tend to be semi-automatic and of a larger calibre than anti-personnel rifles, such as the .50 BMG, 12.7x108mm Russian or even 14.5x114mm Russian and 20mm cartridges. These large cartridges are required to be able to fire projectiles containing usable payloads like explosives, armour piercing cores, incendiaries or combinations of the above, like the Raufoss Mk211 projectile. Due to the considerable size and weight of anti-materiel rifles, snipers operating in 2- or 3-man teams become a necessity.
Barrel[]
Barrels are normally of precise manufacture and of a heavier cross section than more traditional barrels in order to reduce the change in impact points between a first shot from a cold barrel and a follow-up shot from a warm barrel. Unlike many battle rifles and assault rifles the bores are usually not chromed to avoid potential inaccuracy due to an uneven treatment.
When installed, barrels are often free-floated or installed so the barrel only contacts the rest of the rifle at the receiver to minimise the effects of pressure on the fore-end by slings, bipods, or the sniper's hands. The end of the barrel is usually crowned or machined to form a rebated area around the muzzle proper to avoid asymmetry or damage and therefore inaccuracy. Alternately, some rifles like the Dragunov or Walther WA2000 provide structures at the fore-end to provide tension on the barrel in order to counteract barrel droop and other alterations in barrel shape.
Another trait sometimes seen with sniper barrels are external longitudinal fluting that contributes to heat dissipation by increasing surface area while simultaneously decreasing the weight of the barrel.
Sniper rifle barrels may also utilise a threaded muzzle or combination device (muzzle brake or flash suppressor and attachment mount) to allow the fitting of a sound suppressor. These suppressors often have means of adjusting the point of impact while fitted.
Military sniper rifles tend to have longer barrels of around 600 to 750 mm (24 to 30 inches) to allow cartridge propellant to fully burn and attain the optimum combination of low flash signature and bullet velocity. This reduces muzzle flash, helping to keep the sniper concealed. Police sniper rifles may use shorter barrels to improve handling characteristics. The shorter barrels' velocity loss is less important at closer ranges where projectile energy remains well in excess of that needed to reliably perform.
Stock[]
The most common special feature of a sniper rifle stock is the adjustable cheek piece, where the shooter's cheek meets the rear of the stock. For most rifles equipped with a telescopic sight, this area is raised slightly, because the telescope is positioned higher than the iron sights. A cheek piece is simply a section of the stock that can be adjusted up or down to suit the individual shooter. To further aid this individual fitting, the stock can sometimes also be adjusted for length, often by varying the number of inserts at the rear of the stock where it meets the shooter's shoulder. Sniper stocks are typically designed to avoid making contact with the barrel of the weapon.
Accessories[]
An adjustable sling on the rifle is often employed. It is used by the sniper to achieve better stability when standing, kneeling, or sitting. The sniper uses the sling to "lock-in" by wrapping their non-firing arm into the sling forcing their arm to be still. Non-static weapon mounts like bipods, monopods and shooting sticks are also regularly used to aid and improve stability and reduce operator fatigue.
Accuracy[]
Comparison of 0.5, 1, and 3 MOA extreme spread levels against a human torso at 800 m (left) and a human head at 100 m (right)Contrary to popular belief, sniper rifles are not necessarily characterised by exceptional accuracy, especially when compared to civilian sporting rifles, though they nearly always match or exceed the capabilities of other rifles in the military and police categories. A military-issue battle rifle or assault rifle is usually capable of between 3-6 minute of angle (MOA) (1-2 mrad) accuracy. A standard-issue military sniper rifle is typically capable of 0.3-1 mrad (1-3 MOA) accuracy, with a police sniper rifle capable of 0.1-0.5 mrad (0.25-1.5 MOA) accuracy. For comparison, a competition target rifle or benchrest rifle may be capable of accuracy levels up to 0.1 mrad (0.3 MOA).
A 1 MOA (0.3 mrad) extreme spread (meaning the center-to-center distance between the two most distant bullet holes in a shot-group) translates into a variance in the bullet's point of impact of 25 cm at 800 m (about 8 inches at 800 yards), which is considered sufficient to ensure a high probability of hitting a human shape at that distance.
A 2008 United States military market survey for a Precision Sniper Rifle (PSR) calls for 1 MOA (0.3 mrad) extreme vertical spread for all shots in a 5-round group fired at targets at 300, 600, 900, 1200 and 1500 meters, meaning the horizontal spread and hence extreme spread are allowed to exceed 1 MOA, since accuracy is sacrificed in favour of reasonable cost and reliability in harsh environments, as well as ease of operation and maintenance. In 2009 a United States Special Operations Command market survey calls for 1 MOA (0.3 mrad) extreme vertical spread for all shots in a 10-round group fired at targets at 300, 600, 900, 1200 and 1500 meters. Meanwhile current US Sniper Systems (M24 or M110) do not meet this requirement.
Although accuracy standards for police rifles do not widely exist, they are frequently seen with accuracy levels from 0.2-0.5 mrad (0.5-1.5 MOA). For typical policing situations an extreme spread accuracy level of 0.3 mrad (1 MOA) is usually all that is required. This is because police typically employ their rifles at very short ranges. At 100 m or less, a rifle with a relatively low accuracy of only 0.3 mrad (1 MOA) should be able to repeatedly hit a 3 cm (1.2 inch) target. A 3 cm diameter target is smaller than the brain stem which is targeted by police snipers for its quick killing effect.
Maximum effective range[]
| Cartridge | Maximum effective range |
|---|---|
| 5.56x45mm | 300–500 m |
| 7.62x51mm (.308 Winchester) | 800–1,000 m |
| 7.62x54mm R | 800–1,000 m |
| 7 mm Remington Magnum | 900–1,100 m |
| .300 Winchester Magnum | 900–1,200 m |
| .338 Lapua Magnum | 1,300–1,600 m |
| .50 BMG (12.7x99mm NATO)
12.7x108mm (Russian) |
1,500–2,000 m |
| 14.5x114mm | 1,900–2,300 m |
| .408 Chey Tac | > 2,400 m |
Unlike police sniper rifles, military sniper rifles tend to be employed at the greatest possible distances so that range advantages like the increased difficulty to spot and engage the sniper can be exploited. The most popular military sniper rifles (in terms of numbers in service) are chambered for 7.62 mm (0.30 inch) caliber ammunition, such as 7.62x51mm and 7.62x54mm R. Since sniper rifles of this class must compete with several other types of military weapons with similar range, snipers invariably must employ skilled fieldcraft to conceal their position.
The recent trend in specialised military sniper rifles is towards larger calibres that have greater range, such as the anti-personnel .338 Lapua Magnum cartridge and anti-materiel cartridges like the .50 BMG and the 14.5x114mm. This allows snipers to take fewer risks, and spend less time finding concealment when facing enemies that are not equipped with similar weapons.
Note: This article contains information directly from Wikipedia.